.Jim's Gun Supply
"I'll Get You Loaded"
1000 8th Street
Baraboo, WI 53913



How durable is DuraCoat? 
DuraCoat is permanent. With normal use, a firearm finished with DuraCoat will last several lifetimes.

What is DuraCoat? 
DuraCoat is a two part chemical coating. Unlike other firearm finishes, DuraCoat was created specifically for firearms. Other firearm finishes are "spin-off's" from other industries.

Is DuraCoat Teflon based? 
No. Teflon is a lubricating coating which is great for internals, but will not wear as well as DuraCoat on the exterior surface of a firearm. DuraCoat's combination of elasticity and hardness creates a finish impervious to impact, scratching and the elements. Some users say DuraCoat displays some lubricating qualities, but this phenomenon was never intended when DuraCoat was created.

Can DuraCoat be brushed on? 
No, absolutely not. DuraCoat is for spray application only.

Will DuraCoat adhere to hard coat anodizing and Parkerizing? 
DuraCoat loves hard coat anodizing and Parkerizing as a base. Both processes leave a good rooting surface for DuraCoat.

When is DuraCoat fully cured? 
DuraCoat is dry to the touch in 20 minutes, can be handled in 1 hour and is ready for use overnight. Although DuraCoat will gain most of its final hardness, elasticity and chemical resistance over a 2-3 week period, time will continue to enhance DuraCoat's characteristics over a lifetime. DuraCoat, like fine wine, gets better with age. As we say, "DuraCoat wears in, not out."

I hunt along saltwater. Will DuraCoat withstand the salty environment? 
Certainly. DuraCoat is well suited for salty environments. One of DuraCoat's attributes is its extreme ability to resist salt corrosion. A firearm coated with DuraCoat simply will not rust...EVER!

Will DuraCoat burn off my barrel? 
DuraCoat can withstand temperatures as high has 500-600 degrees F. With "normal" shooting, your barrel will never get close to being that hot. If you are fortunate enough to own a transferable machine gun, or if you like to "blaze" with your semi-auto, do not put DuraCoat on your barrel, as your barrel temperature will rise to over 1,000 degrees F. In those cases, use DuraHeat. Our DuraHeat coating can handle temperatures up to 1,800 degrees F.

How easy is DuraCoat removed? 
Not easy at all. The elastic nature of DuraCoat resists blasting. A qualified individual, with the proper blast media, can safely remove DuraCoat without damaging the surface of the firearm. Be careful. In most cases, we recommend lightly blasting the surface, being cautious not to remove any DuraCoat. Just "beat up" the DuraCoat giving it "tooth" so your new application of DuraCoat has something to adhere to.

Which is more durable, DuraCoat or DuraBake? 
Both DuraCoat and DuraBake are extremely durable. The advantage of DuraBake is its availability in a convenient aerosol can. The advantage of DuraCoat is it does not have to be baked and is available in an incredible number of colors.

How come other firearm finish manufacturers boast hardness, but make no mention of elasticity? 
In the case of firearm finishes, a common misconception is "harder is better". This is faulty "old school thinking". Hardness means brittle and brittle means chipping. DuraCoat, being elastic, will not chip. If your DuraCoat chips, it means you have a preparation problem. Most likely, the surface was not clean. Elasticity provides protection by "giving" when confronted with impact. Elasticity also helps prevent scratches and mars.

What is the turnaround time if I send a firearm to Jim's Gun Supply to be refinished? 
Generally the turnaround time is 3-4 weeks. At times, we get extremely busy and the time gets extended. When this happens, we notify our customers.

Does Jim's Gun Supply offer Law Enforcement Pricing on DuraCoat Products? 
Yes, Contact Jim for details. 

If you have arrived here with no form of navigation please click here to go to our home page.